120
Default command level
1: Monitor level
Parameters
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the global GVRP state.
<Sysname> display gvrp status
GVRP is enabled
display gvrp vlan-operation
Use
display gvrp vlan-operation
to display information about dynamic VLAN operations on a port.
Syntax
display gvrp vlan-operation
interface
interface-type interface-number
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
0: Visit level
Parameters
interface
interface-type interface-number
: Specifies an interface by its type and number.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about dynamic VLAN operations on Ethernet 1/1.
<Sysname> display gvrp vlan-operation interface ethernet 1/1
Dynamic VLAN operations on port Ethernet1/1
Operations of creating VLAN : 2-100
Operations of deleting VLAN : none
Operations of adding VLAN to TRUNK : 2-100
Operations of deleting VLAN from TRUNK : none