144
lldp management-address-format string
Use
lldp management-address-format string
to encapsulate the management address in the form
of strings in TLVs.
Use
undo lldp management-address-format
to restore the default.
Syntax
lldp management-address-format string
undo lldp management-address-format
Default
The management address is encapsulated in the form of numbers in TLVs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Examples
# Configure Ethernet 1/1 to encapsulate the management address in the form of strings in
management address TLVs.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] lldp management-address-format string
lldp management-address-tlv
Use
lldp management-address-tlv
to enable management address advertising and set the
management address.
Use
undo lldp management-address-tlv
to disable management address advertising in
LLDPDUs.
Syntax
lldp management-address-tlv
[
ip-address
]
undo lldp management-address-tlv
Default
The management address is advertised through LLDPDUs. For a Layer 2 Ethernet port, the
management address is the main IP address of the lowest-ID VLAN carried on the port. If none of the
carried VLANs is assigned an IP address, no management address will be advertised. For a Layer 3
Ethernet port, the management address is its own IP address. If no IP address is configured for the
Layer 3 Ethernet port, no management address will be advertised.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Parameters
ip-address
: Specifies a management address to be advertised in LLDPDUs.
