25
Port-based VLAN configuration commands
display port
Use
display port
to display information about the hybrid or trunk ports on the device, including the
port names, PVIDs, and allowed VLAN IDs.
Syntax
display port
{
hybrid
|
trunk
} [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
hybrid
: Displays hybrid ports.
trunk
: Displays trunk ports.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the hybrid ports in the system.
<Sysname> display port hybrid
Interface PVID VLAN passing
Eth1/4 100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
# Display information about the trunk ports in the system.
<Sysname> display port trunk
Interface PVID VLAN passing
Eth1/8 2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Table 6 Command output
Field Description
Interface Port
name.
PVID
Port VLAN ID.
VLAN passing
VLANs for which the port allows packets to pass through.
Tagged
VLANs for which the port sends packets without removing VLAN tags.
Untagged
VLANs for which the port sends packets after removing VLAN tags.
