93
description
Use
description
to set a description for an interface. For example, you can include information such
as the purpose of the interface for the ease of management.
Use
undo description
to restore the default setting.
Syntax
description
text
undo description
Default
The description of an interface is
interface-name
Interface
. For example, the default description of
Bridge-Aggregation1 is
Bridge-Aggregation1 Interface
.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and hardware compatibility in Layer 2 aggregate interface
view:
Hardware Command
compatibility
MSR800 Yes
MSR 900
No
MSR900-E Yes
MSR 930
Yes
MSR 20-1X
No
MSR 20
No
MSR 30
Yes
MSR 50
Yes
MSR 2600
Yes
MSR3600-51F Yes
Parameters
text
: Specifies the interface description, a string of 1 to 80 characters.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to
connect to the lab
.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
