128
LLDP configuration commands
display lldp local-information
Use
display lldp local-information
to display the LLDP information to be sent. This information,
contained in the LLDP TLVs, is sent to neighbor devices.
Syntax
display lldp local-information
[
global
|
interface interface-type interface-number
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
global
: Displays the global LLDP information to be sent.
interface
interface-type interface-number
: Displays the LLDP information to be sent out of the
interface specified by its type and number.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no keyword or argument is specified, this command displays all LLDP information to be sent. This
information includes the global LLDP information and the LLDP information about the LLDP-enabled
ports in the up state.
Examples
# Display all LLDP information to be sent.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID : 00e0-fc00-5600
System name : Sysname
System description : H3C Comware Platform Software
H3C Comware Platform Software
Comware Software Version 5.20, Demo 2304L01, Standard
Copyright(c) 2004-2017 New H3C Technologies Co., Ltd.
System capabilities supported : Bridge,Router
System capabilities enabled : Bridge,Router
MED information
Device class: Connectivity device
