137
Field Description
LLDP neighbor information last change time
Time the neighbor information was last updated.
The number of LLDP neighbor information inserted
Number of times of adding neighbor information.
The number of LLDP neighbor information deleted
Number of times of removing neighbor information.
The number of LLDP neighbor information dropped
Number of times of dropping neighbor information
due to lack of available memory space.
display lldp status
Use
display lldp status
to display LLDP status information of a port.
Syntax
display lldp status
[
interface interface-type interface-number
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number
: Specifies a port by its type and number.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no port is specified, this command displays the global LLDP status and the LLDP status information
for all ports.
Examples
# Display the global LLDP status and the LLDP status information of all ports.
<Sysname> display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 0 days,0 hours,4 minutes,40 seconds
Transmit interval : 30s
Hold multiplier : 4
Reinit delay : 2s
Transmit delay : 2s
Trap interval : 5s
Fast start times : 3
Port 1 [Ethernet1/1]:
Port status of LLDP : Enable
