H3C MSR2600-10-X1 Quick Start Manual Download

Page: 4 / 4

Connect one end of the AC power cord to the device and the other end to the power supply

system. Use the bail latch to retain the AC power cord connector for the device. The bail

latch prevents the power cord from falling off.

电源线的两端分别与设备和供电设备紧密相连，并使用电源线卡勾固定，避免因人员走动或

触碰导致电源线的松脱。

Connect the AC power cord

连接交流电源

To access the most up-to-date H3C product documentation on the H3C website at

2. Choose the desired product category and model.

您可以访问

H3C

选择产品类别和产品型号，即可查询和下载与该产品相关的手册。

Obtaining documentation

For more information about the product and installation procedures, log in to www.h3c.com.hk

如需了解产品及安装方面的更多信息，请登录

H3C

网站

www.h3c.com

Summary of Contents for MSR2600-10-X1

Page 1: ...1 Flathead screwdriver Phillips screwdriver Needle nose pliers Wire stripping pliers ESD wrist strap Diagonal pliers Blow dryer Marker Cage nut user supplied Grounding cable provided Stick the rubber...

Page 2: ...evice 2 Connect the other end of the grounding cable to the building grounding device If the installation site has no grounding devices but earth ground is available hammer an angle iron or steel tube...

Page 3: ...cting the power cord Before connecting the power cord make sure the device is reliably grounded Make sure the power switch is off and connect the power cord to the device first and then to the equipme...

Page 4: ...r cord To access the most up to date H3C product documentation on the H3C website at www h3c com hk 1 Go to http www h3c com hk Technical_Documents 2 Choose the desired product category and model H3C...