2
1
H3C MSR2600-6-X1[2600-15-X1] Gigabit Ethernet Integrated Service Gateways Installation Quick Start-5W102
H3C MSR2600-6-X1[2600-15-X1]
-5W102
Installation accessories
When working with the gateway, always wear an ESD wrist strap, and make sure the
strap makes good skin contact and is reliably grounded.
操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认防静电腕带已经良
好接地。
The installation tools are not provided with the gateway. Prepare them yourself as
required.
路由器不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
Mounting the gateway on a workbench
Tool list
!
Cage nut (user supplied)
浮动螺母
(
用户自备
)
Grounding cable
接地线
4 × M6 screws (user supplied
for the MSR2600-15-X1)
M6
机柜螺钉
×4
（
MSR2600-15-X1
需要用户自备）
Mounting brackets
挂耳
4 × M4 screws
M4
挂耳螺钉
×4
Flathead
screwdriver
一字螺丝刀
Phillips
screwdriver
十字螺丝刀
Needle-nose
pliers
尖嘴钳
Wire-stripping
pliers
剥线钳
ESD wrist strap
防静电腕带
Diagonal pliers
斜口钳
Heat gun
热风枪
Network cable
tester
测线仪
Multimeter
万用表
Marker
记号笔
Make sure the air inlet and outlet vents of the gateway are not blocked and the installation site
has a good ventilation system.
The gateway uses left-to-right air aisles.
请确保路由器的进、出风孔不被遮挡，并将路由器安装在具有良好通风散热系统的环境中。
MSR2600-6-X1/2600-15-X1
路由器采用左进右出的风道设计。
Airflow of the gateway
Rubber feet
脚垫
Cable tie
扎带
Power cord
电源线
Console cable
配置电缆
