12
Installing the device in a rack
CAUTION:
The mounting brackets can support only the weight of the device. Do not place objects on the
device.
To install the device in a rack:
1.
Use a mounting bracket to mark the cage nut installation holes in the front rack posts.
Make sure the cage nut installation holes on the front rack posts are on a horizontal line.
2.
Install cage nuts, as shown in
a.
Insert one ear of a cage nut into the marked installation hole.
b.
Use a flathead screwdriver to push another ear into the same hole.
Figure 7 Installing cage nuts
3.
Use M4 screws to attach mounting brackets to both sides of the device.
Figure 8 Attaching mounting brackets to the device
4.
Use M6 screws to attach the mounting brackets on the device to the front rack posts.