12
Connecting the AC Power Cord
Figure 6 Connect the AC power cord
1.
Use a No. 1 Phillips screwdriver to screw off the right part of the
power cable retention clip.
2.
Plug one end of the power cable shipped with the clip into the
power socket and fasten the right part of the power cable
retention clip to the other part to lock the power cable.
3.
Plug the other end into the AC power socket strip of the AC
mains.
CAUTION:
Since typically 10 A busbars are available in equipment rooms
but the PSR1400-A power module requires a 16 A power cable
(AC), you need to use a 16 A busbar.
