14
4.
Put the flat washers and spring washer on the wiring terminal in
turn and screw up the fastening nut with the M6 socket wrench.
Repeat this step for the other three terminals.
5.
Put the protection cover on the wiring terminals and tighten the
fastening screws.
6.
Connect the other ends of the DC power cables to the wiring
terminals of the power source.
CAUTION:
•
When installing a power switch upstream of the DC input
end, make sure that the power switch will control the
negative (–) input.
•
The power cord color code scheme in
is for
illustration only. The cable delivered for your country or
region might use a different color scheme. When you
connect a power cord, always identify the polarity symbol on
its wires.
