14
Configuring the EVB station
Configure the EVB station on the VMM. For more information about configuring VMs through the
VMM, see the VMM manual. (Details not shown.)
Configuring the NMS
Use
VAN Connection Manager
of IMC on the NMS to configure network resources.
The IMC PLAT 5.2 (E0401) and IMC CRM 5.2 (E0401) versions are used in this section.
Figure 4 VAN Connection Manager
To configure the NMS, log in to IMC, click the
Resource
tab, and select
VAN Connection Manager
from the navigation tree (see
), and perform the following steps:
1.
Add an EVB bridge (Edge Switch):
a.
Select
Edge Switch
from the navigation tree.
b.
Click
Add
on the page that appears.
c.
Select the four devices in the IP address range of 192.168.1.11 through 192.168.1.14 from
IP View
.
d.
Click
OK
.
EVB bridge 1, EVB bridge 2, EVB bridge 3, and EVB bridge 4 are displayed in the
Edge Switch
List
page, as shown in
