5-6
Figure 5-8
Remove a fan tray
Removing the Interface Cover on the MPU
Currently, the SMB coaxial clock interfaces are not supported; therefore, covers are installed on such
interfaces to protect them for future use. You can follow these steps to remove the covers in case you
may use these SMB coaxial clock interfaces when they are supported:
Step1
Remove the MPU and lay it on a workbench or table. Stand behind the module with its front panel facing
the same direction as you do.
Step2
Arrange the cover to have its spring clips in a horizontal line and hold the clips slightly with pliers.
Step3
Push the cover outwards to remove it, as shown in Figure 5-9.
Remove the cover with caution to avoid damaging any components on the MPU.
