background image

Convention Description 

be entered 1 to n times. 

A line that starts with a pound (#) sign is comments. 

 

GUI conventions 

Convention Description 

Boldface

 

Window names, button names, field names, and menu items are in Boldface. For 
example, the 

New User

 window appears; click 

OK

Multi-level menus are separated by angle brackets. For example, 

File

 > 

Create

 > 

Folder

 

Symbols 

Convention Description 

 WARNING 

An alert that calls attention to important information that if not understood or followed can 
result in personal injury. 

 CAUTION 

An alert that calls attention to important information that if not understood or followed can 
result in data loss, data corruption, or damage to hardware or software.  

 

IMPORTANT 

An alert that calls attention to essential information. 

NOTE 

An alert that contains additional or supplementary information. 

 TIP 

An alert that provides helpful information. 

 

Network topology icons 

 

Represents a generic network device, such as a router, switch, or firewall. 

 

Represents a routing-capable device, such as a router or Layer 3 switch. 

 

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports 
Layer 2 forwarding and other Layer 2 features. 

 

Port numbering in examples 

The port numbers in this document are for illustration only and might be unavailable on your switch. 

About the H3C S12500 documentation set 

The H3C S12500 documentation set includes: 

Category Documents 

Purposes 

Product description and 
specifications 

Describe product specifications and benefits.  

Provide an in-depth description of software features 
and technologies.  

Describe card specifications, features, and 
standards. 

Summary of Contents for S12500 Series
























Reviews: