71
1/5 Normal
1/6 Normal
2/1 Normal
2/2 Normal
2/3 Normal
2/4 Absent
2/5 Normal
2/6 Normal
Line-card power status:
Slot Board-Type Watts Status
---- --------------- ----- ------
2 None -- Absent
3 None -- Absent
4 None -- Absent
5 None -- Absent
6 None -- Absent
7 None -- Absent
8 LST1GT48LEC1 190 On
9 None -- Absent
10 None -- Absent
11 None -- Absent
12 None -- Absent
13 None -- Absent
14 None -- Absent
15 None -- Absent
16 None -- Absent
17 None -- Absent
18 None -- Absent
19 None -- Absent
Power info on chassis 2:
System power-supply policy: enable
System power-module redundant(configured): 1
System power usable: 2000 Watts
System power redundant(actual): 0 Watts
System power allocated: 1055 Watts
System power available: 945 Watts
SYSTEM POWER USED(CURRENT): 429.65 Watts
System power monitoring unit 1:
Software version: 101
Type In/Out Rated-Vol(V) Existing Usable Redundant(actual)
---------- ------ ------------ -------- ------ -----------------
PSE9000-A AC/DC 220(default) 1 1 0
Summary of Contents for S12500 Series
Page 40: ...30 Figure 28 Installing an upper expansion cable management bracket 1 2 3 4 5 6 7...
Page 109: ...99 Figure 74 Replacing a card for the S12504 A Card to be removed B Card to be installed...
Page 149: ...139 Figure 85 Loopback operation on an optical transceiver...
Page 164: ...154 Figure 100 Example of a device label...
