74
Configuring temperature thresholds for a card
Step Command
1.
Enter system view.
system-view
2.
Configure temperature
thresholds for a card.
•
In standalone mode:
temperature-limit slot
slot-number
{
inflow
|
hotspot | outflow
}
sensor-num
lowerlimit warninglimit
[
alarmlimit
]
•
In IRF mode:
temperature-limit chassis
chassis-number
slot
slot-number
{
inflow
|
hotspot | outflow
}
sensor-num
lowerlimit warninglimit
[
alarmlimit
]
Displaying the temperature information on your switch
Use the
display environment
command to display the temperature information of the sensors on the cards,
including the current temperature and temperature thresholds.
# Display the temperature information of the cards on the switch.
<Sysname> display environment
•
In standalone mode:
System temperature information (degree centigrade):
-------------------------------------------------------------------------------
Slot Sensor Temperature LowerLimit WarningLimit AlarmLimit ShutdownLimit
0 inflow 1 27 -10 55 80 N/A
0 outflow 1 32 -10 55 80 N/A
0 hotspot 1 32 -10 55 85 N/A
9 inflow 1 34 -10 55 75 N/A
9 outflow 1 34 -10 55 85 N/A
9 hotspot 1 37 -10 55 80 N/A
10 inflow 1 29 -10 55 80 N/A
10 outflow 1 51 -10 55 95 N/A
•
In IRF mode:
System temperature information (degree centigrade):
-------------------------------------------------------------------------------
Slot Sensor Temperature LowerLimit WarningLimit AlarmLimit ShutdownLimit
1/0 inflow 1 27 -10 55 80 N/A
1/0 outflow 1 32 -10 55 80 N/A
1/0 hotspot 1 32 -10 55 85 N/A
1/9 inflow 1 34 -10 55 75 N/A
1/9 outflow 1 34 -10 55 85 N/A
1/9 hotspot 1 37 -10 55 80 N/A
1/10 inflow 1 29 -10 55 80 N/A
1/10 outflow 1 51 -10 55 95 N/A
Summary of Contents for S12500 Series
Page 40: ...30 Figure 28 Installing an upper expansion cable management bracket 1 2 3 4 5 6 7...
Page 109: ...99 Figure 74 Replacing a card for the S12504 A Card to be removed B Card to be installed...
Page 149: ...139 Figure 85 Loopback operation on an optical transceiver...
Page 164: ...154 Figure 100 Example of a device label...