3
OAP commands
display oap client info
Use
display oap client info
to display OAP client information.
Syntax
display oap client info
[
client-id
]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
client-id
: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this argument,
the command displays information about all OAP clients in ascending order of client IDs.
Usage guidelines
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
The OAP manager obtains OAP client information from notification packets received from OAP clients.
If the information about a field is missing, the field is not displayed.
Examples
# Display information about OAP client 1.
<Sysname> display oap client info 1
Client ID: 1
Client Description: SecBlade FW
Hardware: A.0
System Software: COMWAREV500R002B108D010
Application Software: V300R001B01D809
CPU: RMI XLR732 1000MHz CPU
PCB Version: A.0
CPLD Version: 3.0
Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.51
Storage Card: 247M Bytes Compact Flash Storage Device
Memory: 3584M Bytes DDR2 SDRAM Memory
# Display information about all OAP clients
.
<Sysname> display oap client info
Client ID: 1
Client Description: SecBlade FW
