4
Hardware: A.0
System Software: COMWAREV500R002B108D010
Application Software: V300R001B01D809
CPU: RMI XLR732 1000MHz CPU
PCB Version: A.0
CPLD Version: 3.0
Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.51
Storage Card: 247M Bytes Compact Flash Storage Device
Memory: 3584M Bytes DDR2 SDRAM Memory
Related commands
display oap client summary
display oap client summary
Use
display oap client summary
to display the summary registration information of OAP clients.
Syntax
display oap client summary
[
client-id
]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
client-id
: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this argument,
the command displays the summary registration information of all OAP clients in ascending order of
client IDs.
Usage guidelines
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
Examples
# Display the summary registration information of OAP client 1.
<Sysname> display oap client summary 1
Client ID: 1
Status: Registered
MAC Address: 3ce5-a6ad-7abf
Interface: Ten-GigabitEthernet2/19/0/1
Last registered: 08/29/2007 11:52:43
# Display the summary registration information of all OAP clients
.
<Sysname> display oap client summary
Client ID: 1
Status: Registered
