24
Execute the
display
commands in any view and the
reset
command in user view.
Task
Command
Display TRILL Layer 2 adjacency
table information.
display
trill
adjacent-table
[
count
|
nickname
nickname
interface
interface-type
interface-number
]
Display brief TRILL information.
display
trill
brief
Display TRILL Layer 2 FIB
information.
display
trill
fib
[
count
|
nickname
nickname
]
Display TRILL GR status.
display trill graceful-restart status
Display TRILL ingress forwarding
information.
display
trill
ingress-route
[
vlan
vlan-list
]
Display TRILL port information.
display
trill
interface
[
interface-type
interface-number
|
verbose
]
Display the VLANs whose TRILL
Layer 3 forwarding status is active.
display trill l3-forwarding active-vlan
Display TRILL Layer 3 adjacency
table information.
display trill l3-forwarding adjacent-table [ count | nickname
nickname interface interface-type interface-number mac
mac-address
]
Display TRILL Layer 3 FIB table
information.
display trill l3-forwarding fib [ count | nickname nickname ]
Display TRILL Layer 3 forwarding
status for VLAN interfaces.
display trill l3-forwarding interface [ vlan-interface
interface-number
]
Display TRILL Layer 3 neighbor
table information.
display trill l3-forwarding neighbor-table
Display TRILL Layer 3 unicast
routing table information.
display trill l3-forwarding unicast-route
Display TRILL LSDB information.
display
trill
lsdb
[
local
|
lsp-id
lsp-id
|
verbose
] *
Display all ingress entries in the
TRILL multicast FIB (MFIB).
display
trill
mfib
ingress
[
vlan
vlan-id
[
local-entry
|
remote-entry
] ]
Display all egress entries in the
TRILL MFIB.
display
trill
mfib
transit
[
nickname
nickname
[
prune-entry
|
rpf-entry
|
vlan
vlan-id
[
mac-address
mac-address
] ] ]
Display information about the TRILL
multicast routing table.
display
trill
multicast-route
[
tree-root
nickname
[
vlan
vlan-list
[
mac
mac-address
] ] ]
Display the TRILL Layer 2 neighbor
table.
display
trill
neighbor-table
Display TRILL neighbor statistics.
display
trill
peer
[
interface
interface-type
interface-number
]
Display the TRILL RPF check table
information.
display
trill
rpf-table
tree-root
nickname
Display TRILL topology information.
display
trill
topology
[
verbose
]
Display information about the TRILL
Layer 2 unicast routing table.
display
trill
unicast-route
[
nickname
nickname
] [
verbose
]
Clear dynamic running statistics of
the TRILL process.
reset
trill
TRILL configuration example
This example is available in Release 1138P01 and later versions.
