8
Figure 7 Tracert TRILL packet forwarding
Protocols and standards
•
RFC 6325,
Routing Bridges (RBridges): Base Protocol Specification
•
RFC 6326,
Transparent Interconnection of Lots of Links (TRILL) Use of IS-IS
•
RFC 6327,
Routing Bridges (RBridges): Adjacency
•
RFC 1195,
Use of OSI IS-IS for Routing in TCP/IP and Dual Environments
•
RBridges: TRILL RBridge Channel Support
•
RBridges: Operations, Administration, and Maintenance (OAM) Support
Configuration restrictions and guidelines
When you configure TRILL, follow these restrictions and guidelines:
•
Configuration in Layer 2 Ethernet interface view takes effect only on the current port.
Configuration in Layer 2 aggregate interface view takes effect on the current interface and its
member ports. Configuration on a member port of an aggregate interface takes effect after the
member port leaves the aggregation group.
•
To connect a spanning tree network to a TRILL network, make sure the following requirements
are met:
{
The spanning tree protocol is disabled on the TRILL network.