3-4
Installing MPUs for the S12504R
The S12504R MPU marks and MPU slot edges are pink-marked.
To install an MPU for the S12504R:
1.
As shown by callout 1 in
, remove the filler panel from the target MPU slot.
Keep the removed filler panel secure for future use.
2.
As shown by callout 2 in
, pivot up the handle of the MPU.
3.
As shown by callout 3 in
, orient the MPU lettering on it upright. Holding the MPU by
the front panel with one hand and supporting the bottom with the other, push the MPU steadily
into the slot along the guide rails.
Keep the MPU parallel to the slot to avoid touching other components in the chassis.
4.
As shown by callout 4 in
, push the MPU until the handle breaks touch the slot edges
tightly.
5.
As shown by callout 5 in
, continue to push the MPU handle until the MPU is secure in
position.
6.
Fasten the captive screws on the MPU.
