6-6
Figure 6-7 Replacing a fabric module (S12516R)
(1) Press the buttons on the ejector levers
(2) Pull the fabric module slowly out of the slot along the guide rails
Replacing a fan tray
WARNING!
•
To avoid bodily injury, do not touch the spinning fans when you replace the fan tray.
•
When you hot swap a fan tray, the fan rotation speed of the remaining fan trays automatically
increases and the fan trays make louder noise. Take protection measures such as wearing an
earmuff or earplug. In addition, make good preparations before the hot swapping to minimize the
operation time.
•
Ensure electricity safety when you hot swap a fan tray.
CAUTION:
•
To prevent dust from entering the device, keep the old fan tray installed in the chassis until a new
fan tray is ready to be installed.
•
Before hot swapping a fan tray on the device, make sure the other fan tray is operating correctly.
To replace a fan tray
1.
Prepare an antistatic mat to place the fan tray to be removed.
2.
Put on an ESD wrist strap, and make sure the wrist strap makes good skin contact and is
reliably grounded. For more information, see "Installing FRUs."
1
1
2
