Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
Chapter 1 IPv6 Configuration Commands
1-21
Table 1-13
Description on the fields of the
display udp ipv6 statistics
command
Field
Description
Total
Total number of received/sent packets
checksum error
Total number of packets with an invalid
checksum
shorter than header
Total number of IPv6 UDP packets whose total
length is less than that specified by the packet
header
data length larger than packet
Total number of packets whose data length
exceeds that specified by the packet header
unicast(no socket on port)
Total number of received unicast packets
without any socket on a port
broadcast/multicast(no socket on
port)
Total number of received broadcast/multicast
packets without any socket on a port
not delivered, input socket full
Number of packets not handled because of the
receiving buffer being full
input packet missing pcb cache
Number of packets that do not match any entry
in the PCB cache
1.1.13 dns server ipv6
Syntax
dns server
ipv6
ipv6-address
[
interface-type interface-number
]
undo dns server ipv6
ipv6-address
[
interface-type interface-number
]
View
VLAN interface view
Parameters
ipv6-address
: IPv6 address of a DNS server.
interface-type interface-number
: Interface type and interface number. It is required
when the IPv6 address of the specified DNS server is a link-local address.
Description
Use the
dns server ipv6
command to configure an IPv6 address for a DNS server.
Use the
undo dns server ipv6
command to remove the configured DNS server.
By default, no DNS server is configured.