Command Manual ( For Soliton ) – Management VLAN
H3C S3100 Series Ethernet Switches
Chapter 1 Management VLAN Configuration
Commands
1-7
1.1.6 display ip routing-table acl
Syntax
display ip routing-table acl
acl-number
[
verbose
]
View
Any view
Parameter
acl-number
: Number of a basic access control list (ACL), in the range of 2000 to 2999.
verbose
: Displays the detailed information about the active and inactive routes that
match the specified ACL. If you do not specify this keyword, only the summary
information about the active routes matching the specified ACL is displayed.
Description
Use the
display ip routing-table acl
command to display the routes that match a
specified basic ACL.
As this command displays the routes that match a specified basic ACL, you can use it
to trace routing policies.
Example
# Display the summary information about the active routes that match ACL 2000.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[Sysname-acl-basic-2000] rule deny source any
[Sysname-acl-basic-2000] display ip routing-table acl 2000
Routes matched by access-list 2000:
Summary count: 1
Destination/Mask Protocol Pre Cost Nexthop Interface
10.1.1.0/24 STATIC 60 0 192.168.0.31 Vlan-interface1
Refer to
Table 1-4
for the description on the output fields.
# Display the detailed information about the active and inactive routes that match ACL
2000.
[Sysname] display ip routing-table acl 2000 verbose
Routes matched by access-list 2000:
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count: 1