Command Manual (For Soliton) – Smart Link-Monitor Link
H3C S3100 Series Ethernet Switches
Chapter 1 Smart Link Configuration
Commands
1-1
Chapter 1 Smart Link Configuration Commands
1.1 Smart Link Configuration Commands
1.1.1 display smart-link flush
Syntax
display smart-link flush
View
Any view
Parameter
None
Description
Use the
display smart-link flush
command to view the information about how the
Smart Link device processes flush messages.
Example
# Display the information about how the Smart Link device processes flush messages.
<Sysname> display smart-link flush
Flush interface :Ethernet1/0/1
Count of flush packets received : 1
Time of last flush packet received : 22:52:23 2006/04/01
Source MAC of last flush packet received : 000f-e20f-5566
Device ID of last flush packet received : 000f-e20f-5566
Control VLAN ID of last flush packet received : 1
Table 1-1
Description on the fields of the
display smart-link flush
command
Field
Description
Flush interface
Interface that receives the latest legal flush
message
Count of flush packets received
Total number of flush messages received
Time of last flush packet received
Time when the last legal flush message is
received
Source MAC of last flush packet
received
Source MAC address in the last legal flush
message received