Command Manual (For Soliton) – Smart Link-Monitor Link
H3C S3100 Series Ethernet Switches
Chapter 1 Smart Link Configuration
Commands
1-2
Field
Description
Device ID of last flush packet
received
Bridge MAC address of the device from
which the last legal flush message was
received
Control VLAN ID of last flush packet
received
Control VLAN ID in the last legal flush
message received
Note:
A legal fulsh message refers to the message whose control VLAN ID is consistent with
the receiving control VLAN ID configured on the receiving port.
1.1.2 display smart-link group
Syntax
display smart-link group
{
group-id
|
all
}
View
Any view
Parameter
group-id
: Smart link group ID, in the range of 1 to 24.
all
: Displays the information about all Smart Link groups.
Description
Use the
display smart-link group
command to display the information about the
specific Smart Link group or all the Smart Link groups.
Example
# Display the information about Smart Link group 1.
<Sysname> display smart-link group 1
Smart Link Group 1 information:
Device ID: 000f-e212-3456 Control-VLAN ID: 1
Member Role State Flush-count Last-flush-time
--------------------------------------------------------------------------
Ethernet1/0/1 MASTER ACTVIE 1 16:37:20 2006/04/21
AGG-1 SLAVE STANDBY 2 17:45:20 2006/04/21