Command Manual (For Soliton) – IP Address-IP Performance
H3C S3100 Series Ethernet Switches
Chapter 2 IP Performance Configuration
Commands
2-3
Description
Use the
display fib ip-address
command to view the FIB entries matching the specified
destination IP address.
If no mask or mask length is specified, the FIB entry that matches the destination IP
address and has the longest mask will be displayed; if the mask is specified, the FIB
entry that exactly matches the specified destination IP address and mask will be
displayed.
Examples
# Display FIB entry information which matches destination 12.158.10.0 and has a mask
length no less than eight.
<Sysname> display fib 12.158.10.0 longer
Route Entry Count: 1
Flag:
U:Usable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Reject E:Equal cost multi-path L:Generated by ARP or ESIS
Destination/Mask Nexthop Flag TimeStamp Interface
12.158.10.0/24 12.158.10.1 U t[85391] Vlan-interface10
# Display FIB entry information which has a destination in the range of 12.158.10.0/24
to 12.158.10.6/24 and has a mask length of 24.
<Sysname> display fib 12.158.10.0 255.255.255.0 12.158.10.6 255.255.255.0
Route Entry Count: 1
Flag:
U:Usable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Reject E:Equal cost multi-path L:Generated by ARP or ESIS
Destination/Mask Nexthop Flag TimeStamp Interface
12.158.10.0/24 12.158.10.1 U t[85391] Vlan-interface10
For details about the displayed information, see
Table 2-1
.
2.1.3 display fib acl
Syntax
display fib acl
acl-number
View
Any view
Parameters
acl-number
: Basic ACL number, in the range of 2000 to 2999.