Command Manual (For Soliton) – IP Address-IP Performance
H3C S3100 Series Ethernet Switches
Chapter 2 IP Performance Configuration
Commands
2-6
Parameters
None
Description
Use the
display icmp statistics
command to display the statistics about ICMP
packets.
Related commands:
display ip interface
,
reset ip statistics
.
Examples
# Display the statistics about ICMP packets.
<Sysname> display icmp statistics
Input: bad formats 0 bad checksum 0
echo 5 destination unreachable 0
source quench 0 redirects 0
echo reply 10 parameter problem 0
timestamp 0 information request 0
mask requests 0 mask replies 0
time exceeded 0
Output:echo 10 destination unreachable 0
source quench 0 redirects 0
echo reply 5 parameter problem 0
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0