Command Manual (For Soliton) – Voice VLAN
H3C S3100 Series Ethernet Switches
Chapter 1 Voice VLAN Configuration
Commands
1-7
1.1.7 voice vlan enable
Syntax
voice vlan enable
undo voice vlan enable
View
Ethernet port view
Parameters
None
Description
Use the
voice vlan enable
command to enable the voice VLAN function on the port.
Use the
undo voice vlan enable
command to disable the voice VLAN function on the
port.
By default, the voice VLAN function is disabled on all ports.
To have the voice VLAN function take effect on a port, you must enable it both globally
and on the port. Note that the operations are order independent.
Note:
Voice VLAN is not supported on Combo ports. For information about Combo port, refer
to
Port Basic Configuration
of this manual.
Related commands:
display voice vlan error-info
,
display voice vlan status
.
Examples
# Enable the voice VLAN function on Ethernet1/0/2.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/2
[Sysname-Ethernet1/0/2] voice vlan enable
1.1.8 voice vlan legacy
Syntax
voice vlan legacy
undo voice vlan legacy