Command Manual (For Soliton) – GVRP
H3C S3100 Series Ethernet Switches
Chapter 1 GVRP Configuration Commands
1-2
<Sysname> display garp statistics interface Ethernet 1/0/1
GARP statistics on port Ethernet1/0/1
Number Of GVRP Frames Received : 0
Number Of GVRP Frames Transmitted : 0
Number Of Frames Discarded : 0
Table 1-1
Description on the fields of the
display garp statistics
command
Field
Description
Number of GVRP Frames Received
Number of the GVRP frames received
on the port
Number of GVRP Frames Transmitted
Number of the GVRP frames transmitted
through the port
Number of Frames Discarded
Number of GVRP frames discarded by
the port
1.1.2 display garp timer
Syntax
display
garp timer
[
interface interface-list
]
View
Any view
Parameters
interface-list
: Specifies a list of Ethernet ports of which the GARP timer settings are to
be displayed.
In this list, you can specify individual ports and port ranges. An individual
port takes the form of
interface-type interface-number
and a port range takes the form
of
interface-type interface-number1
to
interface-type interface-number2
, with
interface-number2
taking a value greater than
interface-number1
. The total number of
individual ports and port ranges defined in the list must not exceed 10.
Description
Use the
display
garp timer
command to display the settings of the GARP timers on
specified ports or all ports.
If the
interface interface-list
keyword-argument combination is not specified, this
command displays the GARP timer settings of all ports.
This command displays the settings of the following timers:
z
Join timer
