Command Manual (For Soliton) – GVRP
H3C S3100 Series Ethernet Switches
Chapter 1 GVRP Configuration Commands
1-6
System View: return to User View with Ctrl+Z.
[Sysname] garp timer leaveall 100
1.1.5 reset garp statistics
Syntax
reset garp statistics
[
interface interface-list
]
View
User view
Parameters
interface-list
: Specifies a list of Ethernet ports.
In this list, you can specify individual
ports and port ranges. An individual port takes the form of
interface-type
interface-number
and a port range takes the form of
interface-type interface-number1
to
interface-type interface-number2
, with
interface-number2
taking a value greater than
interface-number1
. The total number of individual ports and port ranges defined in the
list must not exceed 10.
Description
Use the
reset garp statistics
command to clear the GARP statistics (including
statistics about packets received/sent/discarded by GVRP) on the specified or all ports.
Executing the
reset garp statistics
command without any parameter clears the GARP
statistics of all ports.
Related commands:
display
garp statistics
.
Examples
# Clear GARP statistics of all ports.
<Sysname> reset garp statistics
1.2 GVRP Configuration Commands
1.2.1 display gvrp statistics
Syntax
display gvrp statistics
[
interface interface-list
]
View
Any view