Command Manual (For Soliton) – GVRP
H3C S3100 Series Ethernet Switches
Chapter 1 GVRP Configuration Commands
1-8
Description
Use the
display gvrp status
command to display the global GVRP status (enabled or
disabled).
Examples
# Display the global GVRP status.
<Sysname> display gvrp status
GVRP is enabled
The above information indicates that GVRP is enabled globally.
1.2.3 gvrp
Syntax
gvrp
undo gvrp
View
System view, Ethernet port view
Parameters
None
Description
Use the
gvrp
command to enable GVRP globally (in system view) or for a port (in
Ethernet port view).
Use the
undo gvrp
command to disable GVRP globally (in system view) or on a port (in
Ethernet port view).
By default, GVRP is disabled both globally and on ports.
Note that:
z
To enable GVRP for a port, you need to enable GVRP globally first.
z
You can enable/disable GVRP only on trunk ports.
z
After you enable GVRP on a trunk port, you cannot change the port to other types.
Related commands:
display gvrp status
.
Examples
# Enable GVRP globally.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] gvrp
GVRP is enabled globally.
