Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
Chapter 1 Port Basic Configuration
Commands
1-6
begin
: Each entry must begin with a specified character string.
include
: Each entry must include a specified character string.
exclude
: Each entry must not include a specified character string.
regular-expression
: Regular expression, a string of 1 to 256 characters.
Note:
For details about regular expression, refer to the “Configuration File Management”
module in this manual.
Description
Use the
display brief interface
command to display the brief configuration information
about one or all interfaces, including: interface type, link state, link rate, duplex attribute,
link type, default VLAN ID and description string.
Note:
Currently, for the port types other than Ethernet port, this command only displays the
link state, and shows "--" in all other configuration information fields.
Related command:
display interface
.
Example
# Display the brief configuration information about the Ethernet1/0/1 port.
<Sysname> display brief interface Ethernet1/0/1
Interface:
Eth - Ethernet GE - GigabitEthernet TENGE - tenGigabitEthernet
Loop - LoopBack Vlan - Vlan-interface Cas - Cascade
Speed/Duplex:
A - auto-negotiation
Interface Link Speed Duplex Type PVID Description
------------------------------------------------------------------------
Eth1/0/1 DOWN A A hybrid 1 home
