Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
Chapter 1 Port Basic Configuration
Commands
1-10
Field
Description
Input(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, -
pauses
Input(normal): - packets, - bytes
- broadcasts, - multicasts, -
pauses
Input: 0 input errors, 0 runts, 0 giants, -
throttles, 0 CRC
0 frame, - overruns, 0 aborts, 0
ignored, - parity errors
Output(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, 0
pauses
Output(normal): - packets, - bytes
- broadcasts, - multicasts, -
pauses
Output: 0 output errors, - underruns, -
buffer failures
0 aborts, 0 deferred, 0 collisions, 0
late collisions
0 lost carrier, - no carrier
Statistics on the incoming and outgoing
packets and errors on the port
The “-” indicates that the statistical item
is not supported.
Input(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, -
pauses
Count in packets and in bytes of total
incoming traffic on the port, including
incoming normal packets, abnormal
packets, and normal PAUSE frames
The number of incoming broadcast
packets, the number of incoming
multicast packets, and the number of
incoming PAUSE frames on the port.
Input(normal): - packets, - bytes
- broadcasts, - multicasts, -
pauses
Count in packets and in bytes of
incoming normal packets on the port,
including incoming normal packets and
normal PAUSE frames
The number of normal incoming
broadcast packets, the number of
normal incoming multicast packets, and
the number of normal incoming PAUSE
frames of the port
A hyphen (-) indicates that the statistical
item is not supported
input errors
The total number of incoming error
frames
runts
The number of incoming runt frames
A runt frame is of less than 64 bytes but
has the correct format and CRC field
