Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
Chapter 1 Port Basic Configuration
Commands
1-15
For the two ports forming a combo port, the one in active state is currently enabled and
the one in inactive state is currently disabled. You can refer to the
shutdown
command
to change the state of the two ports.
Note:
For information about combo port, refer to
H3C S3100 Series Ethernet Switch
Installation Manual
.
1.1.9 display storm-constrain
Syntax
display
storm-constrain
[
interface interface-type interface-number
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Parameters
interface-type
: Port type.
interface-number
: Port number.
|
: Uses a regular expression to filter the output configuration information.
begin
: Displays the configurations that begin with the string specified by
regular-expression
.
exclude
: Displays the configurations that do not contain the string specified by
regular-expression
.
include
: Displays the configurations that contain the string specified by
regular-expression
.
regular-expression
: Regular expression.
Description
Use the
display storm-constrain
command to display the storm control
configurations.
Examples
# Display the storm control configurations.
<Sysname> display storm-constrain
Flow Statistic Interval: 5(second)
