Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
Chapter 1 Port Basic Configuration
Commands
1-16
PortName StormType LowerLimit UpperLimit Ctr-mode Status Trap Log Swi-num
--------------------------------------------------------------------------
Eth1/0/1 broadcast 9 99 shutdown normal on off 3
Table 1-5
Description on the fields of the
display storm-constrain
command
Field
Description
Flow Statistic Interval
Interval to collect traffic statistics.
PortName
Name of an Ethernet port
StormType
Traffic type, which can be unicast, multicast, and
broadcast
LowerLimit
Lower threshold of traffic received on the port
UpperLimit
Upper threshold of traffic received on the port
Ctr-mode
Control action to be taken when the
broadcast/multicast/unicast traffic exceeds the upper
threshold, which can be block or shutdown.
Status
Current status of the port, which can be normal or control.
Trap
on: trap information is output when a type of traffic
received on the port exceeds the upper threshold or falls
below the lower threshold.
off: trap information is not output when a type of traffic
received on the port exceeds the upper threshold or falls
below the lower threshold.
Log
on: log information is output when traffic received on the
port exceeds the upper threshold or falls below the lower
threshold
off: log information is not output when traffic received on
the port exceeds the upper threshold or falls below the
lower threshold
Swi-num
Number of port state switchover
1.1.10 display unit
Syntax
display unit unit-id interface
View
Any view
Parameter
unit
-
id
: Unit ID, in the range of 1 to 8.
