Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches
Chapter 1 Login Commands
1-5
Note that these two commands apply to users logging in through the console port and
by means of Telnet.
Examples
# Disable copyright information displaying.
**************************************************************************
* Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
**************************************************************************
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo copyright-info enable
# After the above configuration, no copyright information is displayed after a user logs
in, as shown below.
<Sysname>
1.1.4 databits
Syntax
databits
{
7
|
8
}
undo databits
View
AUX user interface view
Parameters
7
: Sets the databits to 7.
8
: Sets the databits to 8.
Description
Use the
databits
command to set the databits for the user interface.
Use the
undo databits
command to revert to the default databits.
The default databits is 8.
Examples
# Set the databits to 7.
<Sysname> system-view
System View: return to User View with Ctrl+Z.