Command Manual (For Soliton) – Link Aggregation
H3C S3100 Series Ethernet Switches
Chapter 1 Link Aggregation Configuration
Commands
1-4
View
Any view
Parameter
agg-id
: Aggregation group ID to be displayed, which ranges from 1 to 28 and must be
the ID of an existing aggregation group.
Description
Use the
display link-aggregation verbose
command to display the details about a
specified aggregation group or all aggregation groups.
Note that as ports in a manual link aggregation groups do not acquire the information
about their peers automatically, so the entries in the information about the peer ports
displayed are all 0 instead of the actual values.
Example
# Display the details about aggregation group 1.
<Sysname> display link-aggregation verbose 1
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Flags: A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation ID: 1, AggregationType: Static, Loadsharing Type: NonS
Aggregation Description: abc
System ID: 0x16, 0012-a990-2240
Port Status: S -- Selected, U -- Unselected
Local:
Port Status Priority Key Flag
-------------------------------------------------------------------------
Ethernet1/0/4 S 32768 2 {ACDEFG}
Ethernet1/0/5 U 32768 2 {ACG}
Remote:
Actor Partner Priority Key SystemID Flag
--------------------------------------------------------------------------
Ethernet1/0/4 0 32768 0 0x8000,0000-0000-0000 {DEF}
Ethernet1/0/5 0 32768 0 0x8000,0000-0000-0000 {DEF}
