Command Manual (For Soliton) – Link Aggregation
H3C S3100 Series Ethernet Switches
Chapter 1 Link Aggregation Configuration
Commands
1-5
Table 1-3
Description on the fields of the
display link-aggregation verbose
command
Field
Description
Loadsharing Type
Loadsharing type, including Loadsharing and
Non-Loadsharing
Flags
Flag types of LACP
Aggregation ID
Aggregation group ID
Aggregation Description
Aggregation group description string
AggregationType Aggregation
group
type
System ID
Device ID
Port Status
Port status, including selected and unselected
1.1.4 display lacp system-id
Syntax
display lacp system-id
View
Any view
Parameter
None
Description
Use the
display lacp system-id
command to display the device ID of the local system,
including the system priority and the MAC address.
Example
# Display the device ID of the local system.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 000f-e20f-0100
The Actor System ID field is the device ID (consisting of the system priority and the
system MAC address) of the local system.
1.1.5 lacp enable
Syntax
lacp enable