Command Manual ( For Soliton ) – Port Security-Port Binding
H3C S3100 Series Ethernet Switches
Chapter 1 Port Security Commands
1-21
# Use the
display port-security
command to display the related configuration
information.
<Sysname> display port-security
Equipment port-security is enabled
Intrusion trap is Enabled
Disableport Timeout: 20 s
OUI value:
Ethernet1/0/1 is link-down
Port mode is AutoLearn
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableportTemporarily
Max mac-address num is 4
Stored mac-address num is 0
Authorization is ignore
The rest of the information is omitted, if any.
For description of the output information, refer to
Table 1-2
.
