Command Manual (For Soliton) – DLDP
H3C S3100 Series Ethernet Switches
Chapter 1 DLDP Configuration Commands
1-6
Use the
dldp reset
command to reset the DLDP status of the current port disabled by
DLDP.
After the
dldp reset
command is executed, the DLDP status of a port changes from
disable
to
active
and DLDP restarts to detect the link status of the fiber cable or copper
twisted pair.
Related command:
dldp
and
dldp unidirectional-shutdown
.
Example
# Reset the DLDP status of all the ports disabled by DLDP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dldp reset
1.1.6 dldp unidirectional-shutdown
Syntax
dldp unidirectional-shutdown
{
auto
|
manual
}
undo
dldp unidirectional-shutdown
View
System view
Parameter
auto
: Disables automatically the corresponding port when DLDP detects an
unidirectional link or finds in the enhanced mode that the peer port is down.
manual
: Prompts the user to disable manually the corresponding port when DLDP
detects an unidirectional link or finds in the enhanced mode that the peer port is down.
After the port is disabled, it can only send and receive Recover Probe packets and
Recover Echo packets.
Description
Use the
dldp unidirectional-shutdown
command to set the DLDP handling mode for
unidirectional links.
Use the
undo
dldp unidirectional-shutdown
command to restore the default DLDP
handling mode.
By default, the DLDP handling mode after a unidirectional link is detected is
auto
.
Related command:
dldp work-mode
.
