Command Manual (For Soliton) – MSTP
H3C S3100 Series Ethernet Switches
Chapter 1 MSTP Configuration Commands
1-8
Field
Description
Point-to-point
Indicates whether the port is connected to a
point-to-point link.
Config
indicates the configured
value, and
Active
indicates the actual value.
Transmit Limit
The maximum number of packets sent within each
Hello time
Protection Type
Protection type on the port, including Root guard and
Loop guard
MST BPDU format
Format of the MST BPDUs that the port can send,
which can be legacy or 802.1s.
Config
indicates the
configured value, and
Active
indicates the actual
value.
Port Config
Digest Snooping
Indicates whether digest snooping is enabled on the
port.
Num of Vlans Mapped
Number of VLANs mapped to the current MSTI
PortTimes
Major parameters for the port:
z
Hello: Hello timer
z
MaxAge: Max Age timer
z
FwDly: Forward delay timer
z
MsgAge: Message Age timer
z
Remain Hop: Remaining hops
BPDU Sent
Statistics on sent BPDUs
BPDU Received
Statistics on received BPDUs
1.1.5 display stp abnormalport
Syntax
display stp abnormalport
View
Any view
Parameters
None
Description
Use the
display stp abnormalport
command to display the ports that are blocked by
STP guard functions.
Examples
# Display the ports that are blocked by STP guard functions.