Command Manual (For Soliton) – MSTP
H3C S3100 Series Ethernet Switches
Chapter 1 MSTP Configuration Commands
1-17
undo stp
bridge-diameter
View
System view
Parameters
bridgenum
: Network diameter to be set for a switched network. This argument ranges
from 2 to 7.
Description
Use the
stp bridge-diameter
command to set the network diameter of a switched
network. The network diameter of a switched network is represented by the maximum
possible number of switches between any two terminal devices in a switched network.
Use the
undo stp bridge-diameter
command to restore the network diameter to the
default value.
By default, the network diameter is 7.
After you configure the network diameter of a switched network, MSTP adjusts its hello
time, forward delay, and max age settings accordingly. With the network diameter set to
the default value 7, the three time-relate settings, including hello time, forward delay,
and max age, are set to their default values as well.
The
stp bridge-diameter
command only applies to CIST. It is invalid for MSTIs.
Related commands:
stp timer forward-delay
,
stp timer hello
,
stp timer max-age
.
Examples
# Set the network diameter to 5.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp bridge-diameter 5
1.1.16 stp compliance
Syntax
stp compliance
{
auto
|
legacy
|
dot1s
}
undo stp compliance
View
Ethernet port view
Parameters
auto
: Specifies the port to recognize and send MSTP packets in the automatic mode.
