Command Manual (For Soliton) – MSTP
H3C S3100 Series Ethernet Switches
Chapter 1 MSTP Configuration Commands
1-49
If you do not specify the
instance-id
argument, the two commands apply to only the
CIST.
Examples
# Set the bridge priority of the switch in MSTI 1 to 4,096.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp instance 1 priority 4096
1.1.44 stp region-configuration
Syntax
stp region-configuration
undo stp region-configuration
View
System view
Parameters
None
Description
Use the
stp region-configuration
command to enter MST region view.
Use the
undo stp region-configuration
command to restore the MST region-related
settings to the default.
MST region-related parameters include: region name, revision level, and
VLAN-to-MSTI mapping table. By default:
z
MST region name is the first MAC address of the switch
z
All VLANs are mapped to the CIST in the VLAN-to-MSTI mapping table
z
The MSTP revision level is 0
You can modify the three parameters after entering MST region view by using the
stp
region-configuration
command.
Note:
NTDP packets sent by devices in a cluster can be transmitted in only the instances
where the management VLAN of the cluster resides.