Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-1
Chapter 1 802.1x Configuration Commands
1.1 802.1x Configuration Commands
1.1.1 display dot1x
Syntax
display dot1x
[
sessions
|
statistics
] [
interface interface-list
]
View
Any view
Parameter
sessions
: Displays the information about 802.1x sessions.
statistics
: Displays the statistics on 802.1x.
interface
: Display the 802.1x-related information about a specified port.
interface-list
: Ethernet port list, in the form of
interface-list=
{
interface-type
interface-number
[
to
interface-type interface-number
] } &<1-10>, in which
interface-type
specifies the type of an Ethernet port and
interface-number
is the
number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the
display dot1x
command to display 802.1x-related information, such as
configuration information, operation information (session information), and statistics.
When the
interface-list
argument is not provided, this command displays
802.1x-related information about all the ports. The output information can be used to
verify 802.1 x-related configurations and to troubleshoot.
Related command:
reset dot1x statistics
,
dot1x
,
dot1x retry
,
dot1x max-user
,
dot1x port-control
,
dot1x port-method
, and
dot1x timer
.
Example
# Display 802.1x-related information.
<Sysname> display dot1x
Global 802.1X protocol is enabled
CHAP authentication is enabled
DHCP-launch is disabled
Handshake is enabled
Proxy trap checker is disabled