Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-3
Ethernet1/0/2
……
Table 1-1
Description on the fields of the
display dot1x
command
Field
Description
Equipment 802.1X protocol is
enabled
802.1x protocol (802.1x for short) is enabled on the
switch.
CHAP authentication is
enabled
CHAP authentication is enabled.
DHCP-launch is disabled
DHCP-triggered. 802.1x authentication is disabled.
Handshake is enabled
The online user handshaking function is enabled.
Proxy trap checker is disabled
Whether or not to send Trap packets when
detecting a supplicant system logs in through a
proxy.
z
Disable means the switch does not send Trap
packets when it detects that a supplicant system
logs in through a proxy.
z
Enable means the switch sends Trap packets
when it detects that a supplicant system logs in
through a proxy.
Proxy logoff checker is
disabled
Whether or not to disconnect a supplicant system
when detecting it logs in through a proxy.
z
Disable means the switch does not disconnect a
supplicant system when it detects that the latter
logs in through a proxy.
z
Enable means the switch disconnects a
supplicant system when it detects that the latter
logs in through a proxy.
EAD Quick Deploy is enabled
Quick EAD deployment is enabled.
Transmit Period
Setting of the Transmission period timer (the
tx-period)
Handshake Period
Setting of the handshake period timer (the
handshake-period)
ReAuth Period
Re-authentication interval
ReAuth MaxTimes
Maximum times of re-authentications
Quiet Period
Setting of the quiet period timer (the quiet-period)
Quiet Period Timer is disabled
The quiet period timer is disabled here. It can also
be configured as enabled when necessary.
Supp Timeout
Setting of the supplicant timeout timer
(supp-timeout)
Server Timeout
Setting of the server-timeout timer (server-timeout)
