Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches
Chapter 1 Login Commands
1-22
display Display current system information
nslookup Query Internet name servers
ping Ping function
quit Exit from current command view
super Set the current user priority level
telnet Establish one TELNET connection
tracert Trace route function
undo Cancel current setting
1.1.19 set authentication password
Syntax
set authentication password
{
cipher
|
simple
}
password
undo set authentication password
View
User interface view
Parameters
cipher
: Specifies to save the local password in cipher text.
simple
: Specifies to save the local password in plain text.
password
: Password to be set. The password must be in plain text if you specify the
simple
keyword in the
set authentication password
command. If you specify the
cipher
keyword, the password can be in either cipher text or plain text, as described in
the following.
z
When you enter the password in plain text containing no more than 16 characters
(such as 123), the system converts the password to the corresponding
24-character encrypted password.
z
When you enter the password in cipher text containing 24 characters, make sure
you are aware of the corresponding password in plaintext. For example, the plain
text “123456” corresponds to the cipher text “OUM!K%F<+$[Q=^Q`MAF4<1!!”.
Description
Use the
set authentication password
command to set the local password.
Use the
undo set authentication password
command to remove the local password.
Note that only plain text passwords are expected when users are authenticated.
