Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-14
1.1.12 display local-user
Syntax
display local-user
[
domain
isp-name
|
idle-cut
{
disable
|
enable
} |
vlan
vlan-id
|
service-type
{
ftp
|
lan-access
|
ssh
|
telnet
|
terminal
} |
state
{
active
|
block
} |
user-name
user-name
]
View
Any view
Parameters
domain
isp-name
: Displays all local users belonging to a specified ISP domain. Here,
isp-name
is the name of an ISP domain, a string of up to 128 characters. You can only
specify an existing ISP domain.
idle-cut
{
disable
|
enable
}: Displays the local users who are inhibited from enabling
the idle-cut function, or the local users who are allowed to enable the idle-cut function.
Here,
disable
specifies the inhibited local users and
enable
specifies the allowed local
users.
vlan
vlan-id
: Displays the local users belonging to a specified VLAN. Here,
vlan-id
ranges from 1 to 4094.
service-type
: Displays the local users of a specified type. You can specify one of the
following user types:
ftp
,
lan-access
(generally, this type of users are Ethernet access
users, for example, 802.1x users),
ssh
,
telnet
, and
terminal
(this type of user is a
terminal user who logs into the switch through the Console port).
state
{
active
|
block
}: Displays the local users in a specified state. Here
active
represents the users allowed to request network services, and
block
represents the
users inhibited from requesting network services.
user-name
user-name
: Displays the local user with a specified username. Here,
user-name
is a string of up to 184 characters.
Description
Use the
display local-user
command to display information about specified or all local
users.
Related commands:
local-user
.
Examples
# Display information about all local users.
<Sysname> display local-user
0 The contents of local user test:
State: Active ServiceType Mask: L