Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-23
By default, a VLAN uses its VLAN ID (like VLAN 0001) as its assigned VLAN name.
This command is used in conjunction with the dynamic VLAN assignment function. For
details about dynamic VLAN assignment, refer to the
vlan-assignment-mode
command.
Related commands:
vlan-assignment-mode
.
Examples
# Set the name of VLAN 100 to
test
.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 100
[Sysname-vlan100] name test
1.1.21 password
Syntax
password
{
simple
|
cipher
}
password
undo password
View
Local user view
Parameters
simple
: Specifies the password in plain text.
cipher
: Specifies the password in cipher text.
password
: Password to be set:
z
For
simple
mode, the password you input must be a plain-text password.
z
For
cipher
mode, the password can be either a cipher-text password or a
plain-text password, and what it is depends on your input.
A password in plain text can be a string of up to 63 consecutive characters, for example,
aabbcc. A password in cipher text can be a string of 24 or 88 characters, for example,
(TT8F]Y\5SQ=^Q`MAF4<1!!.
Description
Use the
password
command to set a password for the local user.
Use the
undo password
command to cancel the password of the local user.
Note that: