Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-39
1.2.7 display radius statistics
Syntax
display radius statistics
View
Any view
Parameters
None
Description
Use the
display radius statistics
command to display the RADIUS message
statistics.
Related commands:
radius scheme
.
Examples
# Display RADIUS message statistics.
<Sysname> display radius statistics
state statistic(total=1048):
DEAD=1048 AuthProc=0 AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=0
AcctStop=0 OnLine=0 Stop=0
StateErr=0
Received and Sent packets statistic:
Unit 1........................................
Sent PKT total :0 Received PKT total:0
RADIUS received packets statistic:
Code= 2,Num=0 ,Err=0
Code= 3,Num=0 ,Err=0
Code= 5,Num=0 ,Err=0
Code=11,Num=0 ,Err=0
Running statistic:
RADIUS received messages statistic:
Normal auth request , Num=0 , Err=0 , Succ=0
EAP auth request , Num=0 , Err=0 , Succ=0
Account request , Num=0 , Err=0 , Succ=0
Account off request , Num=0 , Err=0 , Succ=0
PKT auth timeout , Num=0 , Err=0 , Succ=0
PKT acct_timeout , Num=0 , Err=0 , Succ=0